Classical generated chlorine dioxide

XzioX® 0.35% solution

Classical chlorine dioxide solution decays very fast when the concentration exceeds 0.5% and becomes explosive.

XzioX® 0.35% contains a 0.35% solution of chlorine dioxide and is therefore not explosive and has a long kinetic halftime (30 days).

Classical chlorine dioxide solution is diluted on the fly in the production process and concentrations may vary.

The balanced application of XzioX® component A and XzioX® component B guarantees the 0.35% concentration (refer to the simple user directions on the packaging and the Material Safety Data Sheets).

Classical chlorine dioxide solution requires complicated and expensive equipment (reactors, mix systems etc).

As the unique composition of XzioX® Component A and XzioX® Component B contain all chemistry to generate the XzioX®  0.35% solution NO equipment is required to generate the solution (only a standard PE-HD black tank is required to generate XzioX® 0.35% solution).

Toxic and impure chemical compounds are used to generate the classical chlorine dioxide solution (Sulphuric Acid and Sodium Hypochlorite)

The chemical compounds of XzioX® Component A and XzioX® Component B are certified and approved according to the highest purity and quality levels.

Conventionally generated chlorine dioxide solution is relatively unstable

XzioX® 0.35% solution once activated is stable for a minimum of 30 days.

Conventional chlorine dioxide solution requires to be generated on site and used immediately and has a kinetic halftime of only a few hours. This also implies that the residual function of classical chlorine dioxide solution is limited.

XzioX® 0.35% solution can be generated on site but can also be transported to a desired location. When the storage conditions in the Material Safety Data Sheet are followed, the kinetic halftime is 30days. This implies that a long residual function of XzioX® 0.35% solution can be achieved over conventional disinfection methods.

Conventional chlorine dioxide solution generated from liquid components decays very fast (unstable as in chemistry the quality of liquid is decreasing as time evolves thus continuous quality cannot be controlled).

XzioX® 0.35% solution is made from two liquid components (XzioX® Component A and XzioX® Component B).

Classical chlorine dioxide solution must be applied immediately as it cannot be stored and has disappeared within a few hours.

As XzioX® 0.35% solution has a kinetic halftime of 30 days it can be applied according to desired situations.

Classical chlorine dioxide leaves as rest products chlorite, chlorate, chlorides and free chlorine and forms a risk for human health (chlorite is very toxic to the human body) and stresses a load on the environment.

XzioX® 0.35% solution does not react with organics and does not create disinfection by products, and does not react with organics in the water supply. 

Classical chlorine dioxide is very corrosive.

XzioX® 0.35% solution is applied in low dosage rates and is NOT corrosive.